The antenna is designed to work in radio communication systems in the UMTS and 3G standards. According to climatic conditions, the antenna is designed for operation in the temperature range from minus 40 to plus 50 ° C and a limiting value of the relative air humidity of 100% at 25 ° C.
The antenna is mounted on a mast or bracket. To obtain a high-quality connection, the direction to the signal source is searched. Then the antenna is fixed to the mast or bracket with the M6 clamp and nuts with washers 6, located on the fastening unit, on which the M5 screw with M5 nut and washers for earthing is also located. As a mast or bracket is recommended to use a metal pipe with a diameter of 22 to 50 mm. After installation, the drop cable is attached to the mast or bracket using the clamp (strap) supplied with the antenna. The end of the cable has an FME connector.